News
Find out about all the latest news and upcoming events at the Oest Group for the Lubricants, Energy, Filling Stations and Mechanical Engineering Divisions and the Group.
Feed units up to 350 m/min
At high feed rates above 150 m/min, good guidance of the wood lamellas during gluing is decisive for the quality of the adhesive application as well…
Application head for 1C-PUR surface gluing
For the production of glulam with 1C-PUR adhesive, Oest has further optimized its PROFITAC VN application head.
Dosing system for controlled primer application
Primer is used to improve the gluing quality for wood/wood bonding with 1-component PUR adhesives and is increasingly in demand on the market.
Revised ribbon spreader for separate MUF adhesive and hardener application
For the production of glued laminated timber with melamine adhesives and hardeners, Oest has completely revised its ECOTOP T ribbon spreader for the…
Cross laminated timber - a longstanding success story
Since its introduction more than 20 years ago, cross laminated timber (CLT) has developed into a very popular building material, as the significantly…
Application head with automatic gluing width fine adjustment
For 1C-PUR and 2C-MUF adhesive OEST has optimized his application head FACETAC FG.
ECOTAC comb system with automatic gluing height adjustment
Oest has developed for its proven extruder head ECOTAC, for the separate MUF finger joint application, an automatic gluing height adjustment.
Oest Mechanical Engineering launches webshop for spare parts
From now on selected spare parts can be ordered conveniently online via our new webshop.
Preview: Trade fair Trä+Teknik in Gothenburg
At a joint stand of our Scandinavian representative AVANCE, Oest informs during the time from 06.09. - 09.09.16 about machinery for the processing of…
Adhesive application with changing feed rates
In the continuous production, e.g. for insulating panels, it is necessary to adjust the adhesive application to the variable feed rates of the coil…